Uke Video Search:

ukulele ukulele music ukulele performers ukulele teaching ukulele clubs ukulele lessons Top 50 Ukulele Sites


Glock disassembly

Ukulele Videos

Glock disassembly

Channel: Sports
Uploaded: November 30, 1999 at 12:00 am
Author: Hank44

Length: 07:05
Rating: 4.70
Views: 227881

Tags: disassembly  Glock  

Video Url:


Embed Code:

Video Comments

7996677x2 (November 30, 1999 at 12:00 am)
Goto __IHATEJEN(.)COM__ short skirt stories
princenoah21 (November 30, 1999 at 12:00 am)
Hot damn. Is the sound fixed? Sweeeeet.
BcashGetMoney (November 30, 1999 at 12:00 am)
i want one man
jorgeandresmunos (November 30, 1999 at 12:00 am)
I will see if I can get one of my buddies to make a vid with me on complete dissasembly, cleaning / maintenance and re-assembly. May take some time, but I will give it a try.
Mickstix18 (November 30, 1999 at 12:00 am)
You seem very knowledgeable on the reassembly/assembly.. Any chance you could put together a vid on full "re" assembly of a glock?? As has been stated a few times before, there's some good vids on take down, but none on putting it back together.. Thanks!
jorgeandresmunos (November 30, 1999 at 12:00 am)
The Mag Catch: Look down in the reciever mag opening. Use a small screwdriver to push the spring-top from left side of reciever to the right. Meanwhile, make sure to hold the mag catch from the right side, otherwise it moves with the spring, so that it won't come out. Once the spring pops out, push the mag catch out from the left to the right. Reassembly: reverse!
jorgeandresmunos (November 30, 1999 at 12:00 am)
Taking out the Slide Lock: Hold the reciever sideways, tilted with either the left or right side facing the table. Push down the slide lock spring with a tool / screwdriver. If you push down enough, the slide lock should fall out almost by itself. If you turn the reciever upsidedown, the slide lock spring will fall out next. May need some shaking.
jorgeandresmunos (November 30, 1999 at 12:00 am)
Dissasembly: From LEFT to RIGHT Assembly, put pins back in from RIGHT to LEFT. That's the ONLY correct way. And don't forget, the Locking Block (smaller) pin goes out first AND goes in first. Doing otherwise could screw up your slide stop lever.
jorgeandresmunos (November 30, 1999 at 12:00 am)
PLEASE, DON'T push the pins out from right to left! That's why you need all that hammering. The trigger pin has double cuts so that it doesn't matter which side goes in first. But if you push it out from left to right, the slide stop lever catches the second cut--> Break out the hammer!!!
160plus (November 30, 1999 at 12:00 am)
Play it in reverse.

Ukulele VideosTim Smithies 2008 | All Rights Reserved.